Color Data Software SpectraMagic NX2
Installing the software
System requirements for the latest version of SpectraMagic NX2 are listed after the Installation procedure.
If you are using a previous version of SpectraMagic NX2, please uninstall the old SpectraMagic NX2 before installing the new one. (See installation Guide for more details.)
Installation procedure
- Save the download file (for example, smnx2_verxxx_all.zip, where xxx is the software version number) to a folder on your computer.
- Extract the files in the downloaded zip file to a folder on your computer.
- Open the Installation Guide (smnx2_install_multi.pdf) in the files extracted in step 2.
- Follow the procedure described in the Installation Guide for installing SpectraMagic NX2.
For information on using the software, refer to the Instruction Manual which will be installed in the same folder as the software and can be accessed from the Start menu. (Start : KONICAMINOLTA : SpectraMagic NX2 : SpectraMagic NX2 Manual).
System Requirements
| Operating System | Windows® 10 Pro 64-bit Version 1903 or higher Windows® 11 Pro Note: The hardware of the computer system must meet or exceed the greater of the recommended system requirements for the compatible OS being used or the following specifications. |
|---|---|
| CPU | Intel® Core i5 2.7GHz or higher processor (recommended) |
| Memory | 2 GB or more (4 GB or more recommended) |
| Hard disk drive | 10 GB or more |
| Other |
|
Compatible instruments
CM-3700A, CM-36dG/CM-36d/CM-36dGV, CF-300, CM-5, CM-3600A/CM-3610A, CM-17d/CM-16d, CM-26dG/CM-26d/CM-25d/CM-23d, CM-M6, CM-25cG, CM-700d/CM-600d, CM-512m3A, CM-2500c, CM-2600d/CM-2500d, CR-5, CR-400/CR-410, DP-400
Firmware versions of compatible instruments
| Firmware versions of compatible Instruments | Supported by NX2 Ver 1.4 or before |
Supported by NX2 Ver 1.5 |
|---|---|---|
| Firmware version | ||
| CM-36dG/CM-36d/CM-36dGV, CF-300, CM-17d/16d,CM-23d,CM-M6, CM-25cG | All | |
| CM-26dG/CM-26d/CM-25d | 1.31 or before | 1.40 or later |
| CM-3700A | 2.05 or later | |
| CM-5/CR-5 | 1.20 or later | |
| CM-700d/600d | 1.23 or later | |
| CR-400/410 | 1.14 or later | |
| DP-400 | 1.16 or later | |
| CM-3600A/3610A | 1.08 or later | |
| CM-2600d/2500d | 1.42 or later | |
| CM-2500c | 5.11 or later | |
| CM-512m3A | 1.04 or later | |
Return to Installing the software.
