You are here:Measuring Instruments: Products; For Color and Appearance; Spectrophotometers / Portable; CM-700d / 600d; Specifications

Spectrophotometers / Portable

Measuring Instruments

content

CM-700d/CM-600d

CM-700d / 600d

Spectrophotometer (spectral type)

NEW

Compact portable spectrophotometer with wireless communication and color LCD screen

Introduction
Specifications
Accessories

Specifications

Major specifications

Model	CM-700d	CM-600d
Illumination/ viewing system	di: 8°, de: 8° (diffused illumination, 8-degree viewing angle), SCI (specular component included)/SCE (specular component excluded) selectable with automatic switching (Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil7, ASTM E 1164, and JIS Z 8722)
Size of integrating sphere	Φ40mm
Detector	Silicon photodiode array (dual 36-element)
Spectral separation device	Diffraction grating
Wavelength range	400 nm to 700 nm
Wavelength pitch	10 nm
Half bandwidth	Approx. 10 nm
Reflectance range	0 to 175%, Display resolution: 0.01%
Light source	Pulsed xenon lamp (with UV cut filter)
Measurement time	Approx. 1 second
Minimum measurement interval	Approx. 2 second (in SCI or SCE mode)
Battery performance	With alkaline dry batteries: Approx. 2,000 measurements With nickel-metal-hydride rechargeable batteries (2300 mAh): Approx. 2,000 measurements with full charge * Stand-alone continuous measurement fi xed to either SCI or SCE mode at 10-second intervals at 23°C
Measurement/ illumination area	MAV: Φ8 mm/Φ11 mm SAV: Φ3 mm/Φ6 mm * Changeable by replacing target mask and selecting lens position	MAV: Φ8 mm/Φ11 mm only
Repeatability	Spectral reflectance: Standard deviation within 0.1%, Chromaticity value: Standard deviation within ΔE_ab 0.04 When a white calibration plate is measured 30 times at 10-second intervals after white calibration
Inter-instrument agreement	Within ΔE_ab　0.2 (MAV/SCI) Based on 12 BCRA Series II color tiles compared to values measured with a master body at 23°C
No. of averaging measurements	1 to 10 (Auto averaging), 1 to 30 (Manual averaging)
Display	2.36-inch TFT color LCD
Interfaces	USB1.1; Bluetooth® standard version 1.2*
Observer	2° observer or 10° observer
Illuminant	A, C, D₅₀, D₆₅, F₂, F₆, F₇, F₈, F₁₀, F₁₁, F₁₂ (Simultaneous evaluation with two light sources possible)
Displayed data	Spectral values/graph, colorimetric values, color difference values/graph, PASS/FAIL result, pseudocolor, color assessment
Color spaces	Lab, LC*h, Hunter Lab, Yxy, XYZ, Munsell, and color difference in these spaces (except for Munsell)
Colorimetric data	MI, WI(ASTM　E313-73/E313-96), YI(ASTM　E313-73/ASTM　D1925), ISO Brightness, 8°gloss value
Color difference formulas	ΔE_ab (CIE1976), ΔE₉₄ (CIE1994), ΔE₀₀ (CIE 2000), CMC (l: c)
Storable data sets	Measurement data: 4,000 sets/Target color difference data: 1,000 sets
Pass/fail judgment	Tolerances can be set to colorimetric values (excluding Munsell), color difference values, color values (excluding 8° gloss value) respectively
Power	Special AC adapter; 4 AA-size alkaline dry batteries or nickel-metal-hydride rechargeable batteries
Size	73 (W) x 211.5 (H) x 107 (D) mm
Weight	Approx. 550 g (without white calibration cap and batteries)
Operating temperature/ humidity range	5 to 40°C, relative humidity 80% or less (at 35°C) with no condensation
Storage temperature/ humidity range	0 to 45°C, relative humidity 80% or less (at 35°C) with no condensation

*: Applicable Bluetooth® profi le: Serial Port Profi le, Output: Bluetooth® Power Class 1 The communication distance may vary depending on the obstacles
and radio wave conditions between the devices. Successful wireless communication is not guaranteed with all Bluetooth®-ready equipment.
-: Bluetooth® is a registered trademark of Bluetooth SIG, Inc. and is used under license agreement.