- You are here:Measuring Instruments
- Products
- For Color and Appearance
- Color Readers
- CR-14
- Specifications
Color Readers
Measuring Instruments
content
CR-14
Color Reader
Color Reader CR-10 Series Low-cost colorimeters
Specifications
Specifications
| Illuminating/viewing geometry | 8/d (8° illumination angle/diffuse viewing: specular component excluded) |
|---|---|
| Measuring area | Approx. Φ8mm |
| Display modes | Whiteness Index: CIE, Hunter, ASTM E313 Yellowness Index: ASTM E313, ASTM Dl925 Yxy (Displayable in CIE display mode) |
| Repeatability | Standard deviation of Whiteness Index: CIE: 0.5, Hunter: 0.1 (Measurement conditions: When measuring white calibration plate) |
| Minimum interval between measurements | Approx. 1 sec. |
| Power source | Four AA-size batteries or optional AC Adapter AC-A12 |
| Battery life | Alkaline-manganese batteries: Approx.2000 measurements at10-sec. Intervals Ni-Cd batteries: Approx. 600 measurements at 10-sec intervals |
| Operating temperature/humidity range | Temperature: 0 to 40°C;relative humidity 85% or less (at 35°C) with no condensation |
| Storage temperature/humidity range | -20 to 55°C; relative humidity 85% or less (at 35°C) with no condensation |
| Standard accessories | White Calibration Plate CR-A74, Soft Case CR-A68; Protective Cap CR-A79; Wrist Strap CR-A73; AA-size batteries (4) |
| Optional accessories | AC Adapter AC-A12; Printer Cable CR-A75: Vinyl Cover CR-A80) |
Specifications are subject to change without notice.
- *
- Measurements of specimens which include fluorescent materials are not recommended.
- Software
- SpectraMagic NX
